Dewatering Elements

High Vacuum Box

DESCRIPTION

High Vacuum Box Introduction:
The high vacuum suction box has a reasonable structure design and is a sealed structure. It is sucked by a vacuum pump to make the paper sheet from low-pressure dehydration to high-pressure rapid dehydration, thereby speeding up the drying of the paper, enhancing the dehydration effect and forming the paper.
Both ends of the panel are equipped with adjusting blocks to adjust the width of the suction opening of the paper sheet. The adjustment block is also equipped with a lubrication device, which can reduce the coefficient of friction by lubricating with clean water and increase the service life of the net

99% Ceramics Dewatering Elements Specification

Material	Al-oxide ceramic or zr-oxide ceramic or si-nitride ceramic	Advantage
Service	Any design can be made as request	(1) Non-Toxic and smell (2) Low coefficient of friction (3) Corrosion resistant (4) Abrasion and impact resistant (5)Anti-Weather and Anti-Aging (6) Self-lubricating (7) Wear Resistant (8) Great liner material for industrial material handling applications (9) UV Resistant/ultraviolet-resistance sheet (10) High Operating Temperature (11) High Tensile Strength (12) High Viscosity (13)Flame Retardant (14)Reprocessed
Color	Black / White / Yellow / Blue / Red / Orange or as request
Application	On paper and pulp industry, Paper machines
Type	Forming board Hydrofoils High vacuum box Low vacuum box Tri-vac box Bi-vac box Felt suction box
Key Features and Benefits	wear-resistant UHMW-PE material extremely smooth surface low friction coefficient a low level of adhesion. No adhesion Excellent chemical resistance For machines with speeds up to 800 m/min